Guangzhou Zhuo Xuanjin - two-station rotor automatic balancing machine operation steps
Published:
2019-07-11 11:58
Nowadays, with the development of technology, more and more manufacturers are improving the quality requirements of motor rotors in various motors, such as automotive motors, power tools and household electrical appliances. With the continuous development of industrial automation, home automation and office automation, and the continuous improvement of computers, automobiles, home appliances, toys, etc., the data shows that the growth rate of motor rotors in the world market is about 5%. In some developed European and American countries, the consumption of motors is large. At present, the fully automatic balancing machine is very popular in the market.
Silicon steel sheets, blades and commutators form the rotor of the motor. Usually, the wire is wrapped around the silicon steel sheet. In this case, the production process will be unbalanced. However, this imbalance will directly affect the product. The working performance and service life have a direct impact on the quality of the product. The development of modern industry, the noise, vibration and other performance requirements of this kind of products are getting higher and higher, and the dynamic balance technology of the motor rotor is also raised higher. Claim.
The dynamic balancing machine is divided into two categories, which are divided into a manual correction dynamic balancing machine and a fully automatic balancing machine. Manual testing to complete the dynamic balance of a rotor, generally need to repeat 3-4 tests and de-duplication, so that the production efficiency is lower, the balance accuracy is not high, the cutting on the rotor is not accurate, then two The station rotor automatic balancing machine includes the following according to the automatic detection and processing sequence of the two stations: (measuring station, cutting de-duty station), the working process of the two-station automatic balancing machine has the following points:
1. The operator places the new rotor into the measuring station and presses the start button.
2. The rotor treatment at each station is completed, the robot moves, and at the same time:
3. Carry the rotor on the measuring station to the cutting de-duty station for the correction of the unbalanced amount:
4. The rotor that has completed the initial calibration is transported from the cutting de-duty station to the measuring station for retesting:
5. At this time, if the rotor on the standby station is qualified, continue to step 1. If it fails, continue with step 2.
Guangzhou Zhuo Xuan Jin dynamic balancing machine manufacturers' automatic balancing machine will bring you a completely different experience. Guangzhou Zhuo Xuanjin is a well-known dynamic balancing machine supplier specializing in the independent research and development of dynamic balancing machines. The product has high precision, high reliability, structural design with beautiful appearance and light weight. Choosing Guangzhou Zhuo Xuan Jin Dynamic Balancing Machine is your best choice. Zhuo Xuan Jin dynamic balancing machine, trustworthy!
Related news
2018-12-03
In addition, if you need to buy a balance test machine, please contact us directly.
2018-12-03
Safety operation of the rotor of the motor to be balanced
電機轉子裝配工的一般操作規程如下: 1、工作前，整理場地，放穩各零、部件，并檢查裝配使用工具和工作環境是否安全良好。 2、吊放電機機座、底板、定子、轉子、軸承等大型部件時必須放好方箱或墊木...
2018-12-03
Rubber roller dynamic balancing machine customer site
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances
2018-12-03
Mainly used in micro-motor rotors, such as automotive motors, household electrical appliances, micro-motors
2018-12-03
[Guangzhou Zhuo Xuanjin] balance machine application range
Dynamic balancing machines are widely used and can be divided into ten categories
2018-12-03
Guangzhou Zhuo Xuanjin various balance machines and their application range
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances, cooling fans, motors, generators, pumps, automobiles, printing, rollers and other industries.