Dynamic balancing machine calibration steps
Published:
2019-09-18 10:53
In rotating machinery, the rotor is a very important part of it. Therefore, to ensure the uniform mass distribution of the rotor, it is necessary to use a dynamic balancing machine for verification. The cause of the rotor imbalance can be specified according to the standard: the imbalance is Due to the uneven distribution of the rotor mass, the rotor generates centrifugal force during the rotation process, which causes the mechanical vibration to mainly act on the bearing. Therefore, the uneven distribution of the rotor mass is one of the important factors causing the rotor imbalance. When we talk about the balancing machine, we must first calibrate it. What are the calibration steps of the balancing machine?
1. Open the calibration dialog box and enter the weight of the test weight by 0.5g and the angle of 0 degrees. If the left and right corrections should be entered at the same time.
2. Add 0.5g plasticine at 0° on the left calibration surface of the groove according to the weight and angle input on the left side. Do not increase the weight on the right correction surface. Click the calibration measurement button.
3. Start the slot by driving, wait for the lock button to turn green, and start the measurement after unlocking. After the measurement time is completed, lock the car to stop the slot.
4. Press the weight and angle entered on the right side to add 0.5g plasticine to the right correction surface of the drum. The left correction surface is not emphasized. Click the calibration measurement button.
5. Start the slot by driving, wait for the lock button to turn green, and start the measurement after unlocking. After the measurement time is completed, lock the car to stop the slot.
6. Do not add test weight to the left and right calibration surfaces, click the calibration measurement button.
7. Start the slot by driving, wait for the lock button to turn green, and start the measurement after unlocking. After the measurement time is completed, lock the car to stop the slot.
8. Click the calibration completion button and the calibration process ends.
Related news
2018-12-03
In addition, if you need to buy a balance test machine, please contact us directly.
2018-12-03
Safety operation of the rotor of the motor to be balanced
電機轉子裝配工的一般操作規(guī)程如下: 1、工作前，整理場地，放穩(wěn)各零、部件，并檢查裝配使用工具和工作環(huán)境是否安全良好。 2、吊放電機機座、底板、定子、轉子、軸承等大型部件時必須放好方箱或墊木...
2018-12-03
Rubber roller dynamic balancing machine customer site
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances
2018-12-03
Mainly used in micro-motor rotors, such as automotive motors, household electrical appliances, micro-motors
2018-12-03
[Guangzhou Zhuo Xuanjin] balance machine application range
Dynamic balancing machines are widely used and can be divided into ten categories
2018-12-03
Guangzhou Zhuo Xuanjin various balance machines and their application range
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances, cooling fans, motors, generators, pumps, automobiles, printing, rollers and other industries.