How to solve the instability of the balance machine detection value?
Published:
2019-10-24 11:10
Reasons and solutions for the balance machine
When the user is in school balance, it is often difficult to balance or fail to achieve the required balance accuracy or balance. After the assembly of the workpiece, there is still a large residual unbalance. In this case, there are many factors influencing the analysis. The reason for this phenomenon is to take effective measures to improve the balance accuracy. Here, we will only briefly describe the common ones. The analysis is as follows:
1. The small motor rotor shaft is eccentric or curved, which causes the measurement error to be too large to accurately find the balance angle..
2. There is dirt on the bearing surface, and the motor will jump when it rotates.
3. The fixed top forging line is not locked, and the bracket is loose, resulting in unstable balance signal input of the balancer test system.
4. The drive belt is too tight.
5. The test speed exceeds the dynamic balance parameter speed.
6. The sensitivity of the sensor is too high or too low, resulting in unstable test speed and affecting the imbalance.
7. The sensor is faulty or the sensor line is shorted or disconnected. The test system is broken.
When it comes to problems, the right solution is the key. Learn more about the faults and solutions that are common when using a balancing machine. It is harmless to the operation of the dynamic balancing machine.
Guangzhou Zhuo Xuanjin engineer reminds: Dynamic balance machine is a high-precision measuring instrument after all, maintenance personnel require certain electrician knowledge, especially weak electricity knowledge, so choose the approved professional maintenance as much as possible, Guangzhou Zhuo Xuan Jin dynamic balancing machine after-sales maintenance Service consultation: 020-36969823.
Related news
2018-12-03
In addition, if you need to buy a balance test machine, please contact us directly.
2018-12-03
Safety operation of the rotor of the motor to be balanced
電機轉子裝配工的一般操作規程如下: 1、工作前，整理場地，放穩各零、部件，并檢查裝配使用工具和工作環境是否安全良好。 2、吊放電機機座、底板、定子、轉子、軸承等大型部件時必須放好方箱或墊木...
2018-12-03
Rubber roller dynamic balancing machine customer site
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances
2018-12-03
Mainly used in micro-motor rotors, such as automotive motors, household electrical appliances, micro-motors
2018-12-03
[Guangzhou Zhuo Xuanjin] balance machine application range
Dynamic balancing machines are widely used and can be divided into ten categories
2018-12-03
Guangzhou Zhuo Xuanjin various balance machines and their application range
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances, cooling fans, motors, generators, pumps, automobiles, printing, rollers and other industries.