Talking about the high heat of automatic positioning technology of dynamic balance machine
Published:
2019-12-14 14:48
At present, most of the dynamic balancing machines on the domestic market need to manually find the imbalance angle, that is, the angle of the imbalance amount is displayed on the actual interface. The operator then finds the angle of the imbalance amount according to the prompt. The dynamic balancer is to measure the rotor unevenness. measure. In addition to non-complex operation, the measurement repeatability is poor, resulting in unqualified product quality.
In this case, the advantages of automatic positioning technology, which can automatically locate the rotor unbalance amount and be simple to operate, are obvious.
Automatic positioning is to control the transmission system to stop the position of the imbalance when the rotor is stopped at a fixed position. Its working principle is to transmit the measured rotor imbalance data to the measurement system, and then the measurement system calculates the received data and transmits the calculated data to the transmission system for positioning, leaving the position of the rotor imbalance at your location. Preset orientation.
This positioning technology can not only achieve the use of a variety of different specifications of the rotor, high accuracy, but also achieve a deviation of less than 10mm, without the need to install additional reflectors, has the advantages of high positioning accuracy, high measurement efficiency and high degree of intelligence.
In foreign countries, the application of automatic positioning technology has become very common. However, at present in China, because this type of positioning technology requires extremely high algorithms, except for a few manufacturers to provide products and technologies, most of them still rely on foreign companies to provide them. .
At present, with the continuous increase of market applications, the requirements for dynamic balancing machines have become higher and higher, and traditional dynamic balancing machines have been difficult to meet the needs of the public. For this reason, many balancing machine manufacturers have begun to invest in research and development of automation technology.
Advantages of using automatic positioning dynamic balancing machine:
1.Improve production efficiency-It only takes 3 ~ 5 seconds for the automatic positioning dynamic balancing machine to start and stop to display the measurement data;
2. Reliable measurement accuracy-Compared with traditional dynamic balance machines, automatic positioning dynamic balance machines have extremely high measurement accuracy and measurement repeatability;
3. Diversified measurement methods-hundreds of calibration specifications, one calibration can be called at any time;
4. Diversification of correction methods-weighting / deduplication can be switched at will;
5, automatic tracking number slot technology-the number slot rotor dynamic balance correction, will not cause positioning errors due to belt slip;
6. Self-test function-automatic diagnosis function of the measurement system, easy maintenance;
7. Cost control-The automatic positioning dynamic balancing machine can save a lot of labor and quickly recover the investment, and increase the employee turnover rate for the boring mechanical handling work.
8. Promote corporate image and product quality, and realize intelligent production.
This article is provided by Guangzhou Zhuoxuanjin Machinery Equipment Co., Ltd. The company specializes in the design, development and sales of automatic balancing machines, automatic positioning dynamic balancing machines, self-driven full-automatic balancing machines, loop-driven balancing machines, universal joint balancing machines, Horizontal dynamic balance machine, vertical dynamic balance machine, on-site dynamic balance instrument, etc., you can also develop various types of dynamic balance machine according to your requirements.
You can also contact our online customer service (qq: 3233915463 // phone: 18933956581 // landline: 020-36969823) We will serve you wholeheartedly and look forward to your contact.
Related news
2018-12-03
In addition, if you need to buy a balance test machine, please contact us directly.
2018-12-03
Safety operation of the rotor of the motor to be balanced
電機轉子裝配工的一般操作規程如下: 1、工作前，整理場地，放穩各零、部件，并檢查裝配使用工具和工作環境是否安全良好。 2、吊放電機機座、底板、定子、轉子、軸承等大型部件時必須放好方箱或墊木...
2018-12-03
Rubber roller dynamic balancing machine customer site
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances
2018-12-03
Mainly used in micro-motor rotors, such as automotive motors, household electrical appliances, micro-motors
2018-12-03
[Guangzhou Zhuo Xuanjin] balance machine application range
Dynamic balancing machines are widely used and can be divided into ten categories
2018-12-03
Guangzhou Zhuo Xuanjin various balance machines and their application range
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances, cooling fans, motors, generators, pumps, automobiles, printing, rollers and other industries.