Application Case of Universal Dynamic Balancing Machine in Generator Manufacturer
Published:
2020-04-17 13:09
Project Background
YYQ-50 universal dynamic balancing machine is a dynamic balancing measurement device that can be widely used in rotating workpieces such as generators, DC motors, explosion-proof motors, automobile starters, etc. It is a representative device of general dynamic balancing measurement technology. In order to quickly and accurately measure the rotor imbalance function, this equipment uses the YYQ Zhuoxuanjin electrical measurement system, which is a universal dynamic balancing machine independently developed by Zhuoxuanjin. It adopts horizontal support design + ring belt transmission method. It can accurately measure the size of the rotor's unbalance and strictly produce in accordance with the international quality standards of ISO9001-2000. It is a sharp tool for motor rotor dynamic balance measurement. It has been used in batches in explosion-proof motors, permanent magnet motors, starter motors and other motor industries.
basic situation
Site requirements: The parking position of the dynamic balancing machine needs to be flat, free of oil, water, power interference, and ventilation.
Bearing diameter: the maximum allowable diameter and the minimum 5mm (including 5mm) within the range of 95mm
Workpiece outer diameter: The maximum allowable value for measuring the outer diameter of the workpiece must be less than 600mm (including 600)
Features
1. Measurement advantages: adopt self-developed electrical measurement system (measurement time 8 ~ 12 seconds).
2. Product highlights: With the ability to adjust the speed of the workpiece speed, the whole machine is produced and designed in strict accordance with the international quality standards of ISO9001-2000, and the maximum outer diameter of the workpiece can be measured to 600 (mm).
3. Protection safety: triple safety protection (electric measuring sensor, safety protection device, emergency stop button).
Calibration process
Install the generator rotor to the measurement station, press the start button, and then the sensor system collects and locates the unbalanced data. After the measurement is completed, manually correct the unbalanced size and angle prompted by the measurement system, press Press the start button, the dynamic balancing machine will be re-tested. If the re-test shows unqualified and continue the operation according to the previous step until it shows qualified.
project outcome
The product quality is improved through the YYQ-50 generator rotor dynamic balancing machine. Its rapid measurement capability greatly improves production efficiency, shortens measurement time, reduces rotor unbalance, and improves product market competitiveness.
Introduction of YYQ-50 generator dynamic balancing machine
Professional design of the swing frame, effective
transmission of mechanical force
Solid and reliable, small vibration damping
Good rigidity ensures the balance quality and precision
of the workpiece
It has convenient loading and unloading and quick
starting
High working efficiency
Set many advantages in one, only to give customers the perfect dynamic balance detection, so that customers feel more at ease
Because of professional, so trust
The basic informationProduct parameters
Technical parameters
65cm
45cm
Gauge,
And the number
Workpiece quality
range（kg）
50
Maximum outside diam
eter ofworkpiece(mm)
Φ260/300
Distance between two
supports（mm）
15/400
Bearing diameter
range（mm）
Φ3/40(120)
≤0.3g·mm/Kg
Minimum residual
unbalance（e mar ）
motor power（KW）
185.335.390.700.1500.
+continuously variable
The workpiece
speed(r/min )
Φ20/150
2/2.4frequency
Product features
Unbalanced reduction
rate（U RR）%
95%
The structural parameters
Vulnerable
artifacts:
Ring belt drive shaft
diameter range(mm)
Keep Improving Pursue Perfection
Related news
2018-12-03
In addition, if you need to buy a balance test machine, please contact us directly.
2018-12-03
Safety operation of the rotor of the motor to be balanced
電機轉子裝配工的一般操作規程如下: 1、工作前，整理場地，放穩各零、部件，并檢查裝配使用工具和工作環境是否安全良好。 2、吊放電機機座、底板、定子、轉子、軸承等大型部件時必須放好方箱或墊木...
2018-12-03
Rubber roller dynamic balancing machine customer site
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances
2018-12-03
Mainly used in micro-motor rotors, such as automotive motors, household electrical appliances, micro-motors
2018-12-03
[Guangzhou Zhuo Xuanjin] balance machine application range
Dynamic balancing machines are widely used and can be divided into ten categories
2018-12-03
Guangzhou Zhuo Xuanjin various balance machines and their application range
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances, cooling fans, motors, generators, pumps, automobiles, printing, rollers and other industries.