国产成人亚洲综合网站不卡,一区二区三区四区亚洲,国产视频久久久久,97精品伊人久久大香线蕉app

Epoxy resin clay

Epoxy resin clay

The main projects are: automatic balancing machine, semi-automatic balancing machine, circle-driven balancing machine, universal joint dynamic balancing machine, single-sided vertical dynamic balancing machine, self-driving whole motor balancing machine, user original dynamic balancing machine technology Improvement and transformation, dynamic balancing of consumable parts sales, special dynamic balancing machine tailored to the needs of users with special workpieces

key word:

Balance mud Rotor weighting Clay
  • Description
  • Image display
  • Product parameters
  • Customer site
  • Troubleshooting
  • · This product is a room temperature curing epoxy balance clay:
    1, can be cured at room temperature, the curing speed is moderate;
    2, the product has thixotropic, large ratio, easy to use, easy to twist, bonding joint hardness is good, high strength, impact resistance, vibration resistance;
    3, the cured product has good acid and alkali resistance, moisture-proof, waterproof, oil-proof and dust-proof performance, resistance to damp heat and atmospheric aging;
    4. The cured product has good electrical and physical properties such as good insulation, compression resistance and high bonding strength.
    5, [Scope of application] It is widely used in rotors, motors or winding coils of wound-type motors with a speed lower than 3000 rpm, which plays the role of balanced interpolation and calibration, and has excellent bonding strength;
    6, can also be used in lifting motors, automotive motors, micro-motors, DC motors and other products, to play the role of bonding, plugging, inlaying, sealing and so on.
    [Appearance and physical properties] Appearance clay-like viscous body, color: blue, brownish yellow, shelf life: 25 ° C 12 months
    [Usage] Mixing ratio: A; B = 100; 100 (weight ratio or volume ratio) usable time: 25 ° C × 60 minutes (100 g mixing amount)
    [Curing conditions] Basic curing (100g mixing amount) at 25°C/6-8 hours, achieving optimum strength at 72 hours
    7. The parts to be inlaid and bonded should be dry and free of oil. If necessary, wipe with alcohol or acetone;
    8. Take about the same amount of A and B components and mix them by hand until the color is even. If the temperature is low, the cement will be hard to preheat (about 30 °C) and soften.
    9. Press the unbalanced amount indicated by the balancer and hand-pick the mixed cement to the unbalanced part of the workpiece;
    10. During the curing process, please clean the used containers and utensils in time to prevent the glue from solidifying on the utensils.

Get product quotes for free

Security verification
Submit